SETTING UP YOUR VT9127

1.Plug the AC adaptor into an electrical outlet, and the AC connector to the bottom of the Base Unit. If the Handset battery pack has not been charged previously, place the Handset in the Base Unit cradle, and allow it to charge for 16 hours.

2.Connect the telephone line cord to the jack on the bottom of the Base Unit, and the other end to the wall jack.

9V AC

TEL.

A fully charged battery pack will provide a maximum talk time

of 4.5 hours, with a maximum standby (off cradle) time of 6

days.

7

GETTING STARTED

Page 7
Image 7
VTech important safety instructions Setting UP Your VT9127