VTech VT9127 important safety instructions Ringer Selection, TONE/PULSE Selection, Press PROG/CHAN

GETTING STARTED

SETTING UP YOUR VT9127

RINGER SELECTION

1.Press PROG/CHAN.

2. Press or until the screen displays RINGER: and the current setting.

3.Press SELECT. The current selection will flash, and you will hear a sample of the selected ring.

4.	Press	or	to select a different ring style (there
	are 4), or turn the ringer OFF.
5.	Press SELECT to confirm your choice.

NOTE: If the ringer is set to OFF, the display will show “RINGER OFF” in idle mode.

TONE/PULSE SELECTION

NOTE: Your VT9127 is factory-preset for TONE dialing.

1.	To change dialing mode, press PROG/CHAN.
2.	Press	or	until the screen displays DIAL
	MODE: and the current setting.
3.	Press SELECT. The current setting is flashing.
4.	Press	or	to change the setting.
5.	Press SELECT to confirm your choice.

8