VTech VT 1511 manual Remote Dial card Battery

Models: VT 1511

1 31
Download 31 pages 37.46 Kb
Page 11
Image 11

THE BATTERY PACK

Remote Dial card Battery

The remote dial card uses a standard lithium battery (CR 2025). This battery is not rechargeable, and may need to be replaced periodically. Under normal use, the battery will provide up to 2 years of service.

If the dial card appears dead and you are no longer able to dial numbers or control the headset functions, the dial card battery may need to be replaced.

1.Purchase a replacement CR 2025 lithium battery (available from most electronics and camera dealers).

2.Remove the dial card battery cover and the old battery.

3.Place the new CR 2025 battery in the dial card. Make sure the positive (+) side is facing up.

4.Replace the battery cover.

IMPORTANT

Do not dispose of this battery in household garbage. For information on recycling and proper disposal, contact your local solid waste collection or disposal organization.

1.Do not open or mutilate the battery. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.

2.Exercise care in handling batteries in order not to short the batteries with conducting materials such as rings, bracelets, and keys. The battery or conductor may overheat and cause burns.

11

Page 11
Image 11
VTech VT 1511 manual Remote Dial card Battery