QUICK REFERENCE GUIDE
Setup
•Plug AC adapter into a standard electrical outlet and base unit.
•Plug Power cord of remote charging stand into a standard electrical outlet. Let headset battery pack charge for 16 hours before first use.
•Set TONE/PULSE switch on underside of base unit.
•Connect the telephone line cord to the base unit and telephone jack.
Making Calls
From the base unit:
•Lift the handset and dial a call normally.
•To end the call hang up
From the wireless headset:
•Put on the wireless headset.
•Flip the microphone down to the ON position. You should hear dial tone.
•Using the infrared dial card (with the keypad facing you) dial a call normally.
•To end the call, flip the microphone up to the OFF position, or using the dial card, press OFF.
Answering Calls
From the base unit:
•Lift the handset and talk.
•To end the call, hang up. From the wireless headset
•Put on the wireless headset.
•Flip the microphone down to the ON position and talk.
•To end the call, flip the microphone up to the OFF position, or using the dial card, press OFF.
To Place a Call on Hold
From the base unit:
•During an active call, press the
HOLD key. To return to the call press HOLD again.
From the wireless headset:
•During an active call, press the HOLD key on the dial card. To return to the call press HOLD again.
Making an Intercom Call
From the base unit:
•Lift the handset and press the INTERCOM key. The base unit will ring the wireless headset up to five times, unless the person using the headset answers the intercom call.
•This feature can also be used to
locate the headset. From the wireless headset:
Note: The microphone must be in the down position, and the headset must have been turned OFF using the dial card, prior to making an intercom call.
•Using the dial card (with the keypad facing you) press the INT.C key.
•The headset will ring the base unit up to five times, unless the person using the base unit answers the intercom call.
Storing Speed Dial Memory
Note: Speed Dial Memory can only be programmed from the base unit, but can be dialed from either the base unit or wireless headset.
•The phone must be OFF and the corded handset should be cradled.
•Press the PROGRAM key.
•Enter the 2 digit memory location where you want to store the number (00 to 20).
21
