Your VT 1980/ VT 1981 cordless telephone is equipped with a 2.5mm Headset Jack for use with an optional accessory Headset for
If you choose to use the Headset option, you must do the following:
The VT 1980 / VT 1981 is also equiped with a detachable belt clip. Align the pins on the inside edge of the belt clip with the notches on the side of the VT 1980 / VT1981 Handset. The belt clip should snap securely into place. Do not force the connection. See Illustration.
The VTech brand compatible Headset has a monaural design which is reversible, so you can wear your Headset on either the left or right ear, leaving one ear free for room conversation.
For maximum sound quality, the flexible microphone should be positioned at the corner or your mouth, about one inch from your face.
INSTALLATION
Obtain an optional accessory Headset, which is compatible with the VT l98OIVT 1981.
Once you have a compatible
2.5mm Headset, locate the Headset Jack on the Handset of your VT 1980/ VT 1981. Connect the plug on the Headset to the jack on the cordless Handset. The plug should fit securely. Do not force the connection. See illustration.
OPERATION
Note: whenever a compatible Headset is connected to the cordless Handset, the microphone on the Handset will be MUTED. This is done to limit the effect of background noise.
The following operational characteristics apply to VTech Headsets. The same may also apply to other
ON RIGHT EAR | ON LEFT EAR |
|
The headband can be adjusted to fit the contour of your head. Using both hands, slide the headband up or down so that it rests comfortablyon your headwith the speaker cushion centered against your ear.
