13
DIALING FROM CALLER ID
1. Press or /CID until you find the desired record
2. Press SELECT to cycle through 3 different dialing strings:
7 digits for example: 624-5688
10 digits for example: 800-624-5688
11 digits for example: 1-800-624-5688
3. When the desired dialing string is displayed, press PHONE. Y our
VT 9122
will wait for a dial
tone and then place your call.
STORING A NAME AND NUMBER INTO THE PHONE BOOK
You can store the names and numbers of 10 frequently called parties.
1. Press MEM/NEW, and then memory location to be stored. You can
review the current location content.
2. Press MEM/NEW again. You will be prompted to input the name.
Enter the name (up to 15 character.) Use DELETE to backspace if
you make a mistake.
Each of the number keys has a specific set of characters. Each press of a particular number
key causes characters to be displayed in the following order:
Number Key Characters ( in order )
1 “ - * ! ”
2 “ A B C ( ”
3 “ D E F ) ”
4 “ G H I ” ”
5 “ J K L ’ “
6 “ M N O ; ”
7 “ P Q R S ”
8 “ T U V ? ”
9 “ W X Y Z ”
NOTE: You may press [ ] key to confirm currently displayed charac-
ter and advance to next location.
3. Press MEM/NEW to enter the number (up to 24 digits). The number
can be entered manually or by using REDIAL to store last number
you dialed. Use DELETE to backspace if you make a mistake.
4. Press MEM/NEW to save your entry. The Handset will return to
STANDBY after a confirmation tone.
PHONE BOOKADVANCED OPERATION