BASIC OPERATION
USING REDIAL
REDIAL
1.Press PHONE. Listen for dial tone.
2.Press REDIAL/PAUSE. The last number you called will automati- cally be redialed.
OR
1.Press REDIAL so that the number is shown on the display.
2.Press PHONE
It can also be used to store the last number dialed into the phone book.
See STORING A NAME AND NUMBER INTO THE PHONE BOOK for details.
ANSWERING CALLS
To answer a call, press any key other than the OFF key.
FLASH
When you receive a Call Waiting alert, press
PHONE/FLASH to switch to the incoming call.
Press PHONE/FLASH again to return to the first call.
HOLD
To place your call on hold, press HOLD. Press HOLD again to return to your call.
NOTE: Call will be terminated if you place the “on hold” Handset back into the charge cradle.
PAGE
The Base can signal the Handset by means of the PAGE key. This is helpful in locating a misplaced Handset. Press PAGE at the Base. The Handset will generate a series of tones (different than inbound call ringing) for a maximum of 60 seconds, and will display:
Press PAGE at the Base or OFF key on the Handset to end the
Page.
BASIC OPERATION
11
