16
ADVANCED OPERATION
Your
VT 9122
cordless telephone is equipped with a 2.5mm Headset Jack for use with an
optional
accessory Headset for hands-free operation.
If you choose to use the Headset option, you must do the following:
INSTALLATION
* Obtain an optional accessory Head set, which is compatible
with the
VT 9122
.
Please contact VTECH Communications Customer Ser-
vice, in the U.S. toll-free at 1-800-595-9511,in the Canada
call 1-800-267-7377 for dealer information in your local area.
You can also purchase a compatible Headset directly from
VTECH Communications Customer Service.
* Once you have a compatible 2.5mm Headset, locate the
Headset Jack on the Handset of your
VT 9122
. Connect
the plug on the Headset to the jack on the cordless Hand-
set. The plug should fit securely. Do not force the connec-
tion. See illustration.
OPERATION
NOTE: Whenever a compatible Headset is connected to the cordless Handset, the micro-
phone on the Handset will be MUTED. This is done to limit the effect of background noise.
* The following operational characteristics apply to VTECH Headsets. the same may also
apply to other (non-VTECH) compatible headsets, but VTECH assumes no responsibility for
their performance.
* The VTECH brand compatible Headset has a monaural design which is reversible, so you
can wear your Headset on either the left or right ear, leaving one ear free for room conversa-
tion. * The headband can be adjusted to fit the contour of your head.
Using both hands, slide the headband up or down so that it
rests comfortably on your head with the speaker cushion cen-
tered against your ear.
* For maximum sound quality, the flexible microphone should
be positioned at the corner of your mouth, about one inch
from your mouth.
BELT CLIP
*The
VT 9122
is also equipped with a detachable belt clip.
Align the pins on the inside edge of the belt clip with the
notches on the side of the
VT 9122
handset. The belt clip
should snap securely into place. Do not force the connec-
tion. See Illustration.
OPTIONAL HEADSET INSTALLATION &OPERATION INSTRUCTIONSo