INSTALLATION CODES AND STANDARDS
The cheesemelter must be installed in accordance with:
1.State and local codes.
2.In USA . . . National Fuel Gas Code, ANSI Z223.1 (latest edition) available from the American Gas Association, Inc., 1515 Wilson Blvd., Arlington, VA 22209.
In Canada . . . Canadian Standard
3.NFPA 96, Vapor Removal from Cooking Equipment (latest edition), available from the National Fire Protection Association, Batterymarch Park, Quincy, MA 02269.
ASSEMBLY — Free Standing Models
Assemble 4" leg base to bottom of cheesemelter.
ASSEMBLY — Over Heavy Duty Gas Range
If the cheesemelter is to be mounted over a Vulcan Heavy Duty Gas Range, a back riser is required. This is furnished when ordered as an elevated cheesemelter.
1.With the back down, place the riser on the floor in front of the range. Remove the backsplash panel from the back riser and two mounting bolts at top.
2.Remove the top castings, the back top and the shipping brackets from the range.
3.Carefully lift the back riser over the range, guiding the riser supports (or bayonets) into the channels provided at the rear of the range (Fig. 2). Depending on range width, there may be two or three riser supports.
RISER SUPPORT
CHANNEL
RANGE 
Fig. 2
— 5 —
