Installation, Operation and Care of
MODEL 1ER SERIES ELECTRIC FRYERS
PLEASE KEEP THIS MANUAL FOR FUTURE USE
GENERAL
Vulcan 1ER Series Electric Fryers are produced with quality workmanship and material. Proper installation, usage and maintenance of your fryer will result in many years of satisfactory performance.
It is suggested that you thoroughly read this entire manual and carefully follow all of the instructions provided.
Vulcan 1ER Series Electric Fryers are available in various sizes, with an array of features and options for a range of commercial fryer applications.
The 1ERD models have solid state controls, melt cycles and two timers. The 1ERC Fryers have microprocessor computer controls, melt cycles and multiple timers.
|
| Width |
| Fry Compound | |
Model | KW | Inches / cm | Voltage | Lb / kg | |
|
|
|
|
|
|
1ER50D/1ER50C | 17 | 151/2 (394 mm) |
| 208/240 3 Ph | |
|
|
|
|
|
|
1ER85D/1ER85C | 24 | 21 (533 mm) |
| 208/240 3 Ph | |
|
|
|
|
|
|
|
|
| |||
• Casters | • |
|
| ||
• Flanged Feet | • Tank Cover |
|
| ||
• Single Baskets | • Removable Splash Guard |
|
| ||
• Twin Baskets | • GRO15 Frymate |
|
| ||
INSTALLATION
Before installing the fryer, verify that the electrical service agrees with the specifications on the fryer data plate which is located on the inside of the door panel. If the supply and equipment requirements do not agree, do not proceed with the installation. Contact your dealer or
UNPACKING
This fryer was carefully inspected before leaving the factory. The transportation company assumes full responsibility for safe delivery upon acceptance of the shipment.
Immediately after unpacking the fryer, check for the following items:
• | Manual and warranty (packaged in clear plastic bag) | • | Clean Out Rod |
• | Drain Extension | • | Legs |
• | Tank Brush | • | Crumb Rack |
— 2 —
