Vulcan-Hart ML-114950 Maintenance, Troubleshooting, Lubrication, Vent, Problem, Possible Causes

MAINTENANCE

WARNING: THE TILTING SKILLET AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING, CLEANING OR SERVICING THE TILTING SKILLET.

WARNING: UNPLUG ELECTRICAL POWER SUPPLY.

LUBRICATION

Never grease or oil the pivot bearings as this may cause problems with tilting. Bearings are oilite and never require lubrication.

VENT

Annually, when the tilting skillet is cool, check the flue and clear any obstructions.

SERVICE AND PARTS INFORMATION

To obtain service and parts information concerning this tilting skillet, contact the Vulcan-Hart Service Agency in your area (refer to listing supplied with the skillet), or Vulcan-Hart Company Service Department at the address or phone number shown on the front cover of this manual.

TROUBLESHOOTING

PROBLEM		POSSIBLE CAUSES
Burner does not come on.	1.	Gas supply to skillet is not on.
	2.	Manual shut-off valve is off.
	3.	Thermostat is not turned on.
	4.	The pan is not in the lowest position.
Skillet difficult to tilt.	Dirt in oilite bearings causing it to bind. Contact
	your local Vulcan-Hart authorized servicer.

— 11 —