PDS-ST410A-VP Manual
1.Key features
Color /Monochrome (Mono) scan selection 600/300 dpi scan selection
Directly save JPG file to microSD card Supports microSD/microSDHC card up to 32GB
Driver free to download for Windows® XP, Windows® Vista™, Windows® 7 and Mac OS® 10.4 or above (direct
2. Functional parts
3. Explanation of the status icons
Item | Function | Description |
1 | SD card indicator | Photos will be stored in microSD card |
2 | Battery indicator | Battery is full |
| ||
|
| Empty battery |
|
|
|
3 | Effect indicator | Color or Mono |
|
|
|
4 | Counting indicator | Show scanned files in microSD card |
5 | Selected resolution | High:600 dpi / Low:300 dpi |
|
|
|
4. LED light indications
5.2 Inserting a microSD memory card (not included)
To operate the scanner, you must insert a microSD Card (not supplied) to record and store your pictures. Inserting the microSD memory card:
1.Turn OFF the scanner.
2.Insert the microSD card into the microSD card slot (with metal side facing up).
Gently press in until card is clicked in and latched. The SD card indicator must appear on the LCD screen.
Note: - Do not force the card into the slot; forcing may damage the scanner and the microSD memory card. Align microSD card position and try again.
5.3 Formatting the microSD memory card
Note: All content on the microSD card will be erased during formatting. It is recommended, but not necessary.
1.Insert a microSD card into the scanner with metal side facing up.
2.Turn on the scanner by pressing the [Power/Scan] button for 2 seconds.
3.Press the [FORMAT] button with a thin, blunt object, such as the end of a paperclip to access the button. An “F” will show on the LCD status display screen.
4.Press the [SCAN] button once to begin formatting the microSD card.
5.The microSD card indicator will blink until the formatting process is complete.
5.4 Time and Date setting
1.Press [TIME SET] button once to enter time setting mode by using a thin, blunt object, such as the end of a paperclip to access the button. The LCD status display screen will show “1##” (step 1) for the year. “##” is a set of number that would be changed to correspond to the actual time/date setting. The numbers
2.Press the [C/BW] or [DPI] button to select the current Year.
3.Press [SCAN] button once to confirm setting.
4.Repeat step 2 and 3 to continue the Time and Date setting process
1
2
3
4
Part
Battery door
Power/Scan
Error LED indicator Scan LED indicator
Function
For 2x AA alkaline batteries
Power On/ Off: Press and hold this key for 2 seconds to turn power on or off. In power on mode, press this button to start scan, press this button again to stop Over speed: Red LED on
Ready for scan: Green LED on
5. Using the scanner
5.1 Installing the battery
1. | Open the battery door by sliding the battery compartment downwards as |
| indicated by the arrow in the diagram below. |
2. | Insert 2x AA alkaline batteries into the battery compartment. |
Indicator
1##
2##
3##
4##
5##
Setting
Year
Month
Date
Hour
Minute
5
6
7
8
9
10
11
LCD screen
Resolution
C/BW
Time set
USB interface
microSD card slot
Format button
Scanning status display
Select High(600dpi)/Low(300dpi) resolution; High/Low resolution mode icon will be displayed on status LCD
Select Color/Mono scan, Color/Mono mode icon will be displayed on status LCD
Press this button to enter Time and Date setting mode
Download photo to a computer via USB cable provided.
microSD card storage location.
Press this button with a thin, blunt object, such as the end of a paperclip to format the microSD card.
3. Turn on the scanner by pressing the [POWER] button for 2 seconds. |
5.After setting the Minute, “5##”, press the [TIME SET] button again to complete the Time and Date setting.
5.5 Setting the resolution
Press the [DPI] button to select High/Low resolution.
High/Low resolution icon will be displayed on status LCD.
5.6 Setting the scan mode
Press the [C/BW] button to select Color/Mono mode.
Color/Mono icon will be displayed on status LCD.
