VXI TC4XYY Step Three: Connect accessories and power

VXL Instruments Ltd. Itona TC4xyy Hardware User’s Guide

Step Three: Connect accessories and power

NOTE: BEFORE CONNECTING ANY CABLES, ENSURE POWER CABLE IS UNPLUGED FROM THE UNIT. PLEASE

USE 6A (MIN) / 250V AC 0.75 sq mm, H05VV-F CERTIFIED POWER CORD.

Pictures below show the various connectors available on the rear panel of the client.

MIC AUDIO LINE IN

2 – USB PORT

COM PORT 2

COM PORT 1

SVGA PORT

PS/2 KBD

AC POWER IN

AUDIO LINE OUT

EHTERNET PORT

LPT PORT

PS/2 MOUSE PORT

Itona TC4xyy

Rear view

Installation 9

Contents

Main Itona TC4xyy Hardware Users Guide Copyright and Trademark notices Federal Communication Commission (FCC) Statement Warning Preface Table of Contents Introduction Overview Features Optional Features Installation Step One: Unpack Step Two: Prepare Step Three: Connect accessories and power Instructions to connect various accessories Connector Symbol Caution: Step Four: Connect to the Server Direct Connection through RS232 Dial-In Remote Connection through a Modem Specifications Hardware Mechanical Environmental Operating Electrical Connectors and Cables Connectors The following tables provide pin details for various connectors on the rear panel of the client. COM Port 9-pin D-type male connector. RS232C compatible, operating at 115.2K baud maximum 10/100 LAN Port Connectors and Cables 15 RJ-45 modular 8-pin jack. 10/100 Mbps Pin Signal 1 TxD+ 2 TxD- 3 RxD+ 6 RxD- Video Port Cables 10/100 LAN Cable COM Port (Serial Port) Cables VXL Instruments Ltd. Itona TC4XYY Hardware Users Guide 9-pin to 25-pin Straight Connection Printer Cable Note: 1 2-9 10 11 12 15 18-25 - Strobe + Data Bits 0 - 7 - Acknowledge + Busy + Paper End - Error Ground PARALLEL PORT PARALLEL DEVICE Troubleshooting Problem Solution