8.Boiling water and steam will now be ejected from the holes in soleplate. Impurities are washed away with it. Move the iron forward and backward over the sink during this process.
9.When the water tank has become empty, reinsert the steam control knob and set the steam control to “no steam” position 
.
10.If necessary repeat self cleaning to be sure all impurities have been washed out.
11.Move the iron over a (preferably) old piece of fabric. This is to ensure that the soleplate will be dry during shortage.
12.Set the temperature control dial to “OFF”, unplug the power supply cord and allow the iron to cool down before storing it.
WARNING: Take care not to scald yourself during the cleaning process.
Removing the Variable Steam Control Knob
The Variable Steam Control Knob will need to be removed prior to self cleaning. Review the following instructions to remove the Variable Steam Control Knob properly.
Change the steam control to 
Variable Steam Control Knob will pop up.
Grasp the Variable Steam Control Knob and remove.
Variable Steam Control Knob.
Please note notch on steam iron and 2 tabs on the Variable Steam Control Knob. These will help you insert the control knob properly when
To reinsert slide the control knob into the opening of the steam iron. Push the knob all the way down. The twist clockwise to engage knob.
9
