- 3 -
INSTRUCTIONS Tevion Battery Charger is designed to charge only Ni-Cd
(Nickel Cadium) and Ni-MH (Nickel Metal-Hydride) type of
rechargeable batteries.
This Tevion Charger has a micro-processor built in that can
automatically control the charging of Nickel Cadmium (Ni-Cd) and
Nickel Metal-Hydride (Ni-MH) rechargeable batteries of AAA, AA,
C and D size. It use -V to control the charging of Ni-Cd batteries
and +V for Ni-MH. This ensures that rechargeable batteries with
different brands and capacities will always be fully charged. The
charger can also charge 9V rechargeable batteries using a
continuous trickle charge. There is also discharge, deep
conditioning, and self test function for this charger.
The charger is designed so that if you were charging with both
compartments, the compartment filled first would be charged first,
while the other compartment would be in waiting mode.
As the charger charges two pieces of battery at the same time, it
would work best if both batteries in the same compartment have
similar characteristics. This means that the batteries should have
the same size and same capacity. If they are different, the charger
will charge according to the battery with the smaller capacity. If one
battery is empty and the other is full, it is best to discharge the
batteries first. It is also helpful to deep condition new batteries first.
Please note that batteries should only be removed when in
READY mode. If for some reason that you would need to
remove and re-insert the batteries during charge/discharge,
please press the yellow DISCHARGE button twice to refresh
the charger.