SELF TEST MODE

The Tevion Charger can perform a self test to check if the charger is fully functional. When a “beep” sound is heard, the charger is ready to be used.

1.Remove all batteries and unplug the jack plug from charger.

2.Connect the AC/DC adaptor to the wall electric socket.

3.Push the DISCHARGE button and hold it down, and then insert the jack plug into the charger. Release the DISCHARGE button, and the LEDs will light up as follows:

 

Power

Discharge

Charge

Ready

Discharge

 

 

 

 

 

 

Test Start

Mode

 

 

 

 

 

Compartm

 

 

 

ent 1

 

 

 

 

 

Compartm

 

 

 

ent 2

 

 

 

 

 

Ready

 

 

 

Mode

 

 

 

 

 

Discharge

 

 

Mode

 

 

 

 

 

Test

Finish

 

 

 

 

 

Mode

 

 

 

 

 

LED light

LED blink for 5 times

LED light once and blink 3 times Beeper sound once

Charge

Read

 

Sound

 

y

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4.If the LEDs do not light accordingly, the battery charger is not fully functional.

-6 -

Page 7
Image 7
Wachsmuth & Krogmann MW5798 instruction manual Self Test Mode