Do not use the compressor without installed guards.
Please note that the compressor will start automatically, when the pressure falls to the minimum designated pressure.
Make sure the compressor is switched off and disconnected from the power supply before starting it.
Check the compressor and the accessories carefully and follow their instructions for maintenance.
Check the compressor for possible damages before any use. All safety and protection devices or slightly damaged parts must be inspected for proper function before any use.
Check to see that all of the moving parts are working properly and are not jammed.
All parts have to be mounted correctly and have to meet all conditions for proper operation of the compressor.
All damaged protection parts have to be repaired or replaced by an authorized service station.
Damaged switches have to be replaced by an authorized
Do not operate the compressor, in case the switch cannot switch “ON” or “OFF”.
Keep handles dry and free from oil or grease.
SAVE THESE INSTRUCTIONS!
5
