Wachsmuth & Krogmann TAW-2030 manual

4.Set the pressure regulator to the required working pressure. (see FIG. 2)

FIG. 2

5.Connect the air-hose to the pressure-hose connector (8). (see FIG. 3)

6.Connect the air-tool with the air-hose.

7.If you will not start to work immediately, switch the compressor off and disconnect from the power-supply.

FIG.3

FIG. 4

CAUTION: The regulated pressure may not exceed the maximum working pressure of your connected air-tool!

If you notice any unusual noise or vibration, stop the air compressor and refer to “troubleshooting”

12