Wadia Digital 830 manual These functions are available on the remote control only

Models: 830

1 15
Download 15 pages 31.19 Kb
Page 12
Image 12

PLAY: Pressing play causes the unit to begin playing. If the drawer was opened, the unit will close the drawer, and then begin playing.

STOP: Pressing stop causes the disc to stop playing.

PAUSE: Pressing pause suspends playing until play is pressed, or until pause is pressed again

VOLUME UP and VOLUME DOWN: Pressing these increases or decreases volume by 0.5 dB. The LED bar graph on the front panel indicates the volume level, with one light illuminating

for every 5 dB increase in volume. At the maximum volume level, only the top volume light is illuminated.

NEXT TRACK/PREVIOUS TRACK: Pressing these keys skips to the next, or previous track.

DRAWER OPEN/CLOSE (O/C): Opens and closes the CD loading drawer.

INVERT*: The Wadia 830 has the ability to invert absolute phase in the digital domain. Pressing the Invert key on the remote control will cause the Wadia 830 to invert phase; pressing it again will switch the phase back to normal. When the phase is inverted, the PHASE LED will illuminate on the front panel.

MUTE*: The Wadia 830 Compact Disc Player has two mute modes that are automatically implemented under different circumstances. Note that CD will continue playing even when the output is muted.

Software Mute: When the Mute key is pressed on the remote control, the Wadia 830 Compact Disc Player’s DSP engine transmits a stream of zero signal level samples to the DAC section, which results in zero output.

Relay Mute: The Wadia 830 Compact Disc Player has mute relay connected between the positive and negative outputs. When this relay is engaged, it connects the positive output to the negative output, reducing the output to zero. This relay, which produces an audible click when it engages or disengages, is not in the music signal path. The mute relay is engaged:

1.When the Wadia 830 Compact Disc Player detects AC input level below its minimum operating range.

2.Each time the Wadia 830 Compact Disc Player power switch is turned on.

3.When the volume control is set to zero AND the mute key on the remote control

is pressed.

When the Wadia 830 is in either Mute Mode, the Mute LED will illuminate.

REPEAT*: Pressing this button will cause the disc to repeat continuously. Pressing it twice will repeat the current track continuously. Pressing it a third time will stop repeating. The repeat mode is indicated by the front panel LED’s

INPUT’: The Wadia 830 Compact Disc Player can be configured with four digital inputs,

in addition to the internal CD drive (See section on Optional Inputs). Each time the input key is pressed, the next input is selected. For example, if you are listening to the internal CD drive, and you press the input select, Input 1 will be selected, press it again, and Input 2 will be selected and so on. After Input 4, the list will begin again with the CD drive.

SEARCH FORWARD/BACKWARD*: Pressing and holding these keys will speed forward or backward within the current track.

*These functions are available on the remote control only.

Page 12
Image 12
Wadia Digital 830 manual These functions are available on the remote control only