Assembling the Roller

Installing the Batteries and Attaching the Strap

Checking the Inlet Valve

If the unit is new or has been stored for an extended period of time the inlet ball can become stuck and the pump may be difficult to prime. To check:

1. Open the battery	+
door. The battery	+
door is located on	-	-		+	-
	+	-	+		-

the drive housing.
the drive housing.

2.Insert the batteries in the proper direction.

1.Turn the valve body counterclockwise and pull down to remove.

2.Shake the inlet valve assembly gently. If it does not rattle, remove the inlet ball retainer and clean the ball.

3.Reassemble the inlet valve.

Filling the Fluid tank

		Inlet Ball
		Retainer
		Ball
	Inlet Valve	Inlet Ball
	Inlet Valve	Holder
	Assembly	Holder
	Assembly

CAUTION

Improper installation of batteries may cause batteries to overheat and leak acid. Acid may cause severe injury and/or property damage.

NOTE: Use high quality alkaline batteries only.

3. Attach the strap to the loops on the drive housing.

Removing and Attaching the Drive Housing to the Fluid Tank

Open

Close

1.Remove the drive housing by turning the drive housing counterclockwise.

2.Attach the drive housing by setting it onto the fluid tank at a 90° angle and turning clockwise.

Attaching the Fluid Hose

1.Slide the fluid hose through

the anti-kinking spring and the spring clip.

2. Push the fluid hose to the	Fluid Hose
port on the side of the
drive housing.

3.Slide the spring clip over the fitting to keep the hose securely in place.

4.Slide the anti-kinking spring up against spring clip.

1. Place the drive housing on the fluid tank at a 90° angle.

2. Remove the fluid tank cap and fill the tank with paint.

3. Wipe the lip, threads, and body of the fluid tank to remove any spilled or splattered material.

4. Replace the cap and lock the drive housing securely onto the fluid tank.

The On/Off switch has two speeds for controlling the paint flow – High and Low. Choose the setting which is appropriate for your application. If too much paint is being delivered to the roller on High speed, use the Low speed setting. If paint flow is still too great, shut the roller off, then turn back on when more paint is needed.

Applying Paint

Begin rolling as paint appears to saturate the roller cover. If paint is flowing faster than you can roll,turn the pump off until more paint is needed.

NOTE: Do not place the roller below the level of the paint when not in use. Paint will siphon to roller even if motor and pump are turned off.

©1997 Wagner Spray Tech. All rights reserved.	3	English

Cordless Power Roller specifications

The Wagner SprayTech Cordless Power Roller is a revolutionary tool designed to streamline the painting process, offering efficiency and convenience that traditional rollers simply cannot match. This innovative power roller takes the labor-intensive task of painting and transforms it into a more manageable and enjoyable activity, perfect for both DIY enthusiasts and professional painters alike.

One of the standout features of the Wagner Cordless Power Roller is its cordless operation. Powered by a rechargeable battery, it eliminates the hassle of tangled cords and the need for nearby power outlets. This freedom allows users to maneuver freely across a variety of surfaces, whether they are tackling interior walls, ceilings, or exterior projects. The battery life is impressive, providing ample runtime to complete most jobs without interruptions.

The Power Roller boasts a built-in material delivery system that ensures an even and consistent paint application. Its adjustable speed settings allow users to customize the flow of paint according to their preferences and the specific requirements of the task at hand. By providing control over the paint delivery, the roller minimizes overspray and reduces waste, making it a more environmentally friendly option.

Another notable characteristic is its interchangeable roller covers, which allow users to switch between different textures and finishes. This adaptability is great for achieving the desired look on various surfaces, from smooth drywall to textured finishes. The roller is also designed for easy cleanup, with removable components that can be quickly washed after a job.

The ergonomic design of the Wagner Cordless Power Roller enhances user comfort, making it suitable for extended periods of use. Its lightweight construction reduces fatigue, while the well-placed grips ensure a secure hold during operation. Additionally, the roller's compact size makes it easy to store and transport.

Incorporating advanced technologies, the Wagner SprayTech Cordless Power Roller is not just a tool, but a game-changer in the painting industry. With its innovative features and thoughtful design, it empowers users to achieve professional-quality finishes with ease and efficiency, revolutionizing the way we approach painting projects. Whether you're a homeowner looking to refresh your spaces or a contractor needing a reliable tool, this power roller is an investment worth considering.

Wagner SprayTech Cordless Power Roller owner manual Assembling the Roller, Using the Roller

Models: Cordless Power Roller