INSTALLATION
•When wall mounting the telephone feed the line cord into the angled groove on the back of the telephone and plug into wall jack.
•Hold the Walker Clarity so that the holes on the mounting bracket line up with the raised mounting pins on the modular wall jack. Once the holes are lined up, push the phone in towards the wall jack and then slide the phone downward until it is securely seated on the wall jack.
•Plug one end of the handset cord (coiled) into the bottom of the handset.
•Plug the other end of the handset cord into the jack located on the lower left edge of the Walker telephone and hang up receiver.
•When the phone is wall mounted the handset knob will need to be reversed to hold the handset in place. To reverse, pull up on the knob and turn a quarter turn clockwise. The knob will hold the handset in place when you hang up.
•To convert phone from one mounting position to the other simply depress the tabs located above the feet on the mount- ing plate and lift bracket off base of the phone. Follow the instructions above for positioning the bracket.
Avoid placing the unit where it will be exposed to excessive heat or humidity.
10 | Walker W300 |
