
WALKER W300 FEATURES
➤ Ringer Controls | ➤ Visual Ringer |
E N G L
The volume of ring can be adjusted by pressing the ringer volume up switch or down switch until the desired ring volume is achieved.
The style of ring can also be adjusted by depressing the Ringer Style button. Six ringer styles are available allowing you to customize your ring.
You can check the volume and style of ring selected without waiting for an incoming call. With the handset in the cradle press the BOOST Button. The phone will ring indicating the style and volume selected.
When the Ringer ON/OFF is set to OFF, the red Ringer Off Indicator on the front of the phone will illuminate. The Visual Ringer will flash to alert you of an incom- ing call.
| Ringer | Ringer |
Neck Headset Volume | Off/On | |
Loop | Down | Ringer |
| ||
|
| |
| Ringer Style Volume Up |
A lighted ringer works in conjunction with the low frequency ringer. It sends out a visual flashing alert every time a phone call is coming in. (This ringer will light up regardless of the setting on the ringer volume control.)
➤Warble Ringer
The warble rate, or speed of ring can be also be varied from Fast/Medium/Slow when AC power pack is installed.
➤Tone/Pulse Selection
The W300 Phone can be used as either a TONE (touch dial) or PULSE (rotary dial) phone. Tone dialing is required for using special phone services such as long distance calling. Please check with your local phone company on certain types
of service.
Note for Users with Pulse/Rotary ser- vice only: Many automated answering systems used by banks, stores and gov- ernment agencies ask you to “Push 1 for service”, “Push 2 for the operator”, etc. You must switch the tone/pulse switch on the top edge of the phone to tone before
I
S
H
13