INSTRUCTIONS FOR USE
MAKING ONE WAFFLE
1.Plug cord into 120V AC wall outlet.
2.Press top of the rocker switch to turn unit on (rocker switch will light, indicating that the unit has power).
3.Turn browning control knob to the desired setting.
4.The waffle maker will now begin the preheating process. This should take approximately six minutes. When the waffle maker is ready for baking, the green indicator light located on each
of the upper and lower waffle grid covers will light, and the waffle maker will sound six beeps. (This is for first waffle of each baking session.)
NOTE: When baking two waffles at the same time, the wafflemaker will beep 3 times to indicate when each waffle is ready. The green indicator light located on the waffle grid cover will also be illuminated.
5.Preheat your Waring® Pro Belgian Waffle Maker on setting #4 or preferred setting (green indicator lights located on waffle grid cover will be illuminated when preheated).
6.For best results, do not open waffle maker during cooking process. Doing so will offset the timing mechanism.
7.Using the recipes provided, fill the measuring cup to the top. Pour batter evenly into the center of the waffle grids. Use a heatproof spatula to spread the batter evenly over the grids.
8.Close top cover and rotate the waffle grids 180°.
9.The green Ready indicator will turn off.
10.When the waffle is baked to the set darkness, the unit will beep three times and the green indicator light will illuminate.
11.Rotate waffle grid with the lit indicator light to the top position.
12.Raise top cover and remove the baked waffle.
13.Repeat if making additional waffles.
6
