BLUETOOTH SETTINGS | Chapter 5 |
See Chapter 3 for
Connect and Disconnect
Scan the “Set Connection” barcode before pairing up the WWS500 Freedom Scanner and the Bluetooth dongle/internal Bluetooth adaptor.
Set Connection
Scan the “Disconnect Bluetooth” barcode if you are moving the scanner to a different PC or Bluetooth dongle/adaptor. After scanning this barcode you will need to scan the factory default barcode on page 7.
Disconnect Bluetooth
Bluetooth Power Off Settings
This option controls the length of time that the Bluetooth radio will stay powered on when not in use.
1 Minute | 3 Minutes |
5 Minutes | 10 Minutes |
29
