WatchGuard Technologies V100 manual The Firebox V60, V60L and V80 models, Power Port

Front and Back Views

Power Port

This interface serves as the connection to a 100VAC-to-240VAC (50/60Hz) source. Use the power cord supplied in the package to connect this appliance to a UPS device or to a power outlet. The power supply can auto-detect 110/220 voltage.

NOTE

Always connect the power cable to the power port on the back of the V10 before you connect it to the AC outlet.

NOTE

In the event of a power failure, this security appliance, if left connected to the power source, automatically restarts itself after electrical power has been restored. You do not have to unplug and then reconnect the appliance to the power source.

The Firebox V60, V60L and V80 models

The front panels of the Firebox V60, V60L, and V80 security appliances contain the features shown in the following illustration.

Accelerated Ethernet

Interfaces

0	(Private)	Console Interface
1	(Public)
2	(DMZ)	Ready
3	(DMZ)	Admin	Power LED
		Alarm

100	10	100	10	100	10	100	10	100	10	100	10
											Ready
											Admin	Power
								HA			Alarm
0		1			2		3		HA2	HA1	Console	Reset

Reset port

High Availability	High Availability
Status LED	(HA Interface)

Accelerated Ethernet Interfaces

Four accelerated, Ethernet interfaces (RJ-45 connectors) labeled 0 (Private), 1 (Public), 2 (DMZ1), and 3 (DMZ2) act as the primary conduits through which passes all of the network data traffic. Incorporated into each interface are two indicator

Firebox V10, V60L, V60, V80, V100 Hardware Guide 5