TECHNICAL INFORMATION
Voltage: | 230V ~ 50Hz |
Max Power: 6500W (28.3 Amps)
Plate Ratings:-
Rear Left Hotplate: O 145mm - 1200W
Rear Right Hotplate: O 180mm - 1800W
Front Left Hotplate: O 210mm - 2300W
Front Right Hotplate: O 145mm - 1200W
Dimensions: 581mm x 513mm x 48mm
Weight: 8Kg
Complies To: EN 60335 - 1 & EN
INSTALLATION
Before selecting a position to install the hob, the following must be considered:
*Do not install the hob near refrigerating devices.
*Do not fit the hob over a cooker without a cooling fan, dishwasher, refrigerator, freezer or washing machine.
*The worktop the hob is fitted into should be resistant to temperatures up to 100oC. This applies to the veneer, plastic surfaces, glues and varnishes.
*When installing the electric supply to the hob, ensure that the cable does not touch any hot parts of the hob or other units around it.
*Once installed the clearances around the hob should be as detailed in Fig.1, when fitted on work top over a carrying cupboard or Fig.2 when fitted on a work top over a ventilated oven.
Fig. 1
Fig. 2
POSITIONING & FITTING THE HOB
1.Cut out a square opening in the work top, as shown in Fig.3, with a minimum of 60mm of the work top behind the opening.
Fig. 3 | 581 |
| 513 |
483
555
2.Sit the hob into the
3.Fit the tension brackets loosely and then with the hob centered tighten all the tension brackets evenly starting in the centre and moving diago- nally. (see Fig.4) Fill the gap between the hob & worktop with a silicone sealer if required.
Fig. 4
Worktop
Seal Ceramic
Bracket
4
