Waterpik Technologies WP-480 manual Re-Installing a Waterpik Hidden Pivot Ball Showerhead

10

Re-Installing a Waterpik® Hidden			Note: Some Waterpik® showerheads have large nuts that do not leave
Pivot Ball Showerhead			enough room on the Showerpik® bracket threads for the pivot ball to be
1. Place the large nut over the	1		attached. If this is the case, contact Water Pik, Inc. customer service at
			1-800-525-2774 with your shower model number to obtain an extension
Showerpik® bracket threads with
			to the Showerpik® bracket threads. (2C)
the large nut threaded end facing you
(narrow end toward bracket). (1)		Large
2. Thread pivot ball onto Showerpik® bracket threads		Nut	2C
and hand tighten clockwise to a snug fit. (2A) Use an			Showerpik® Bracket
adjustable wrench or pliers to tighten an additional			Threads
¼–½ turn. (2B)			Showerpik® Thread
Important: Do not over tighten.			Extension
			Oversized Large Nut
2A	2B

Pivot Ball

Tighten Tighten

Showerhead