6.Hose Attachment to Diverter Valve:
Locate ridged hose connection end. Line up the notches on the diverter valve with the raised areas inside the hose nut and insert then turn ¼ turn
to lock into place. (6A)
6A
1/4 turn
To Showerpik® Power Handle: |
| |
Hand tighten hose end to the hose | 6B | |
Tighten | ||
| ||
inlet on the back of the Showerpik® |
| |
power handle. (6B) |
|
7.If showerhead or diverter valve becomes loose during use,
9
8.Attach your fixed mount showerhead or handheld showerhead bracket to the threads of the Showerpik® diverter just as the showerhead had previously been installed on the shower pipe. If you own a fixed mount or handheld showerhead with a Waterpik® hidden pivot ball see reinstallation instructions in next section.
Note: Showerhead attachments may vary from pictures above. | ENGLISH |
| |
|
|
