2. Connecting The APA32 unit
2.1. Mains Power Supply
The power cable socket and mains power On/Off switch are located on
the rear panel of the APA32 unit.
The power supply is auto-switching and supports 100-240V, 50-60Hz.
Make sure the mains power switch is set to Off (O) before connecting
the APA32 to the mains.
Then plug the supplied power cable into the APA32 power socket and
to your electricity connection. Switch the mains power switch on (|).
If you need to disconnect the power cable, please be sure to switch the
mains power switch off first.
0
|