Wayne-Dalton 8700 installation instructions Label Placement, Bolts and nuts, To 7/8

Sound framing members

(3) 5/16”

Bolts and nuts

Horizontal track

Perforated angle

5/16”-18 x 1-1/4” Hex bolts must extend into the track to serve as a roller stop

Perforated angle bolted using (2) 5/16” x 1-5/8” hex head lag screws to ceiling member and parallel to door

	3/4” To 7/8”	3/4” To 7/8”
	Door edges
	Horizontal tracks
25	Label Placement
	Tools: Step Ladder

IMPORTANT: Using the illustration, attach the appropriate labels to the ap- propriate location on the section, as shown.

NOTE: The Spring Warning tag(s) are factory attached (one per spring).

NOTE: Because of different configurations, some labels may require minor relocations.

Factory Attached, Torsion spring tag(s) (one per spring)

IMPORTANT!

WHEN CONNECTING A TROLLEY TYPE GARAGE DOOR

OPENER TO THIS DOOR, A WAYNE-DALTON

OPENER/TROLLEY BRACKET MUST BE SECURELY

ATTACHED TO THE TOP SECTION OF THE DOOR, ALONG WITH ANY U-BARS PROVIDED WITH THE DOOR. THE INSTALLATION OF THE OPENER MUST BE ACCORDING TO MANUFACTURER’S INSTRUCTIONS AND FORCE SETTINGS MUST BE ADJUSTED PROPERLY.

Operator bracket label

Residential

warning label

HIGH SPRING TENSION CAN CAUSE SERIOUS INJURY OR DEATH.

DO NOT adjust, repair or remove springs or parts to which springs are connected, such as steel brackets, cables, wood blocks, fasteners or other parts of the counterbalance system.

Adjustments or repairs must ONLY be made by a trained door systems technician using proper tools and instructions.

DO NOT remove, cover or paint over this tag. Product user should inspect this tag periodically for legibility and should order a replacement tag from the door manufacturer, as needed.

WARNING WARNING

Lift handles/gripping points are required on this door, located as spelled out in the installation instructions, even if the door is motor operated.

Failure to install and use these lift handles/ gripping points on this door can result in serious injury to fingers and/or hands, if placed in the opening between sections, when the door is operated manually.

Lift handles/gripping points are required on this door, located as spelled out in the installation instructions, even if the door is motor operated.

Failure to install and use these lift handles/ gripping points on this door can result in serious injury to fingers and/or hands, if placed in the opening between sections, when the door is operated manually.

WARNING		WARNING
The adjacent bottom corner bracket and		The adjacent bottom corner bracket and
all cable retention features including		all cable retention features including
milford pins, cotter pins, & clevis pins are		milford pins, cotter pins, & clevis pins are
under HIGH SPRING TENSION.		under HIGH SPRING TENSION.
Adjustments and repairs must only be		Adjustments and repairs must only be
made by a trained door systems		made by a trained door systems
technician, using proper tools and		technician, using proper tools and
instructions.		instructions.
DO NOT REMOVE, COVER OR PAINT OVER		DO NOT REMOVE, COVER OR PAINT OVER
THIS LABEL. PRODUCT USER SHOULD		THIS LABEL. PRODUCT USER SHOULD
INSPECT THIS LABEL PERIODICALLY FOR	Bottom section warning labels	INSPECT THIS LABEL PERIODICALLY FOR
LEGIBILITY AND SHOULD ORDER A		LEGIBILITY AND SHOULD ORDER A
REPLACEMENT FROM THE DOOR		REPLACEMENT FROM THE DOOR
MANUFACTURER AS NEEDED.		MANUFACTURER AS NEEDED.

14

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer,

refer to your local yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com