Wayne-Dalton installation instructions Windload Rated, DS-350COMMERCIAL ROLL-UPDOORS

Models: DS-350

1 12

Page 1

Read the enclosed instructions carefully before attempting to install this door. Pay close attention to all warnings and important safety notices.

This manual MUST be attached to the wall in close proximity of the door.

Image 1

Contents

WINDLOAD RATED INSTALLATION INSTRUCTIONSDS-350COMMERCIAL ROLL-UPDOORS IMPORTANT NOTICEIMPORTANT SAFETY NOTICES HINTPREPARATION INTRODUCTIONMATERIAL CLEARANCESSTEP 2 CHECK THE DOOR OPENING STEP 1 UNPACKING DOORSOPERATION OPENING HEIGHTSTEP 3 INSTALLING MOUNTING ANGLES AND GUIDES LIFTING THE DOOR ASSEMBLY STEP 4 INSTALL BRACKETS AND DRIVE COMPONENTSSTEP STEP 6 SECURE AXLE SADDLE CASTINGS HINTSTEP 7 PRE-TENSIONTHE DOOR SPRINGS STEP 9 LUBRICATE AND ADJUST THE GUIDES STEP 8 INSTALL SLIDE BOLT LOCKSSTEP 10 CHECK AND ADJUST SPRING BALANCE HINTAs saddle castings are STEP 11 INSTALLATION OF TOP DRAFT STOPSTEP 12 ALIGN THE SPROCKETS STEP 13 INSTALL THE CHAIN KEEPERPage LIMITED WARRANTY Roll-UpSheet DoorWayne-DaltonCorporation Door & Systems Division