Operating Instructions and Parts Manual | WSA120 |
|
|
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.
™ Wireless Sump
Pump Monitoring System
Description
A Flood Alert™ Wireless Sump Pump Monitoring System is designed to notify the home owner of an immediate problem in the sump pit. An alarm will sound and a light will flash indicating that the water level has risen within the sump pit, and could potentially overflow.
Unpacking
After unpacking the unit, carefully inspect for any damage that may have occurred during transit. Check for loose, missing or damaged parts.
The packaging includes:
T E C H N O L O G Y
•3V Lithium battery
•Transmitter
•Float switch assembly
•Receiver
•Transformer
•Float switch bracket
•3 Zip ties
•Clip
Safety Guidelines
This manual contains information that is very important to know and understand.
General Safety
Information
California proposition 65
This product or
its power cord may
contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Wash hands after handling.
Installation
Always disconnect the power source
before attempting to install, service, relocate or maintain the pump. Never touch sump pump, pump motor, water or discharge piping when pump is connected to electrical power. Never handle a pump or pump motor with wet hands or when standing on wet or damp surface or in water. Fatal electrical shock could occur.
This information is provided for SAFETY and to PREVENT EQUIPMENT PROBLEMS. To help recognize this information, observe the following:
Danger indicates an imminently
hazardous situation which, if not avoided, WILL result in death or serious injury.
Warning indicates a
potentially hazardous situation which, if not avoided, COULD result in death or serious injury.
Caution indicates a
potentially minor or moderate injury.
Notice indicates important
Safety Guidelines
Read these rules and instructions carefully. Failure to follow these instructions could cause serious bodily injury and / or property damage.
All wiring must be performed by a
qualified electrician. The pump must be installed in compliance with all local codes and the National Electrical Code.
Read & Follow All Instructions
Save These Instructions
Do Not Discard
1.Unplug the sump pump.
2.Loosen the top nut on the float switch.
3.Slide the nut out of the way on the float switch wire (Fig. 1).
4.Slide the float switch into the mounting bracket (Fig. 1).
1
2
information, that if not followed, may cause damage to equipment.
Figure 1 - Mounting float on bracket
REMINDER: Keep your dated proof of purchase for warranty purposes!
Attach it to this manual or file it for safekeeping.
© 2010 Wayne Pumps | For parts, product & service information | |
| visit www.waynepumps.com |
|
