Weber 2200 Series manual Removal of all tape, Remove packaged parts

Assembly

Supplies needed

You will need a soap and water solution to check for gas leaks. (See Step "Check for gas leaks.")

Refer to exploded view if replacement parts are needed.

Your LP tank is shipped empty for safety. After setting the LP fuel scale you will need to fill it. (See Step "Fill LP tank.")

While we give much attention to our products, unfor- tunately an occasional error may occur. If a part is missing, do not go back to the store. Call the Weber Customer Service Center toll free 1-800-446-1071to receive immediate assistance. Have your owner’s manual available for reference.

Step 1

Removal of all tape

Remove tape from the following locations:

front and rear of side work tables

swing tables

swing table slide bars

bottom tray beneath the cooking box

bottom accessory trays

Step 2

Remove packaged parts

Remove and unpackage warming rack, Weber Warm-Up Basket, 2 cooking grates, cardboard box (which contains cookbook and warranty card), 8 short stainless steel Flavorizer Bars and 5 long stainless steel Flavorizer Bars.

Note - Be sure no packaging material is left in the cooking box before reinstalling parts.

Warming basket

Weber Warm-Up

Basket

Cooking grates

Short Stainless

Steel Flavorizer

Bars

Long Stainless

Steel Flavorizer

Bars

Figure 2

Figure 1

2