Step 7
Install Lid
Remove hinge pins and hair pin cotters from back of cooking box.
Set the lid in place. Align the hinges at the rear of the barbecue. Insert hinge pins from the outside. Insert hair pin cotters into the small holes in the hinge pins. Figure 10.
Remove tape securing the thermometer into its holder.
Hair pin cotter
Hinge pin
Figure 10
Step 8
Install Weber Warm-Up Basket
Insert one end of the Weber
Figure 11
Step 9
Set LP fuel scale
You will need: LP tank (empty).
Note - For accuracy, the fuel scale must be set with an empty tank.
We utilize various LP tank manufacturers. Some of the tanks we receive have differing top collar assemblies. (The top collar is the metal protective ring around the valve.) One series of tanks mounts with the valve facing front. The other tanks mount with the valve facing away from the fuel scale. These types of tanks are illustrated in Figure 12.
Loosen the tank lock wing nut. Tighten so the lock is held up out of the way. Figure 12 (a). Lift and hook the tank onto the fuel scale. With an empty LP tank, adjust the fuel scale setting to E with scale setting (top) wing nut. Figure 12 (b).
CAUTION: Do not remove adjustment wing nut from tank scale.
After adjusting tank scale, push tank down a couple of times to check that the tank scale is set on “E”.
Scale setting wing nut
(a)
E
F
(b)
E
F
Figure 12
5
