MAINTENANCE
Crossover® Ignition System Operations Replace Igniter Batteries
If the Crossover® ignition system fails to ignite the LEFT burner in a burner set, light the LEFT burner with a match. If the LEFT burner lights with a match, then check the Crossover® ignition system.
•Check that both ignition wires(1,2) are attached prop- erly.
•Check that the Crossover® ignition button is activating.
•Replace battery with a like brand battery.
•You should hear the igniter sparking.
If the Crossover® ignition system still fails to light, contact the Customer Service Representative in your region using the contact information sheet provided with your manual.
(1) |
(2) |
Parts required: 1 AA alkaline battery per igniter.
Unscrew igniter button from top of control panel. Remove igniter button and contact spring. Remove old battery and replace with a new AA alkaline battery. Positive end(1) of battery faces up as shown in illustration. Replace spring contact(2) and screw igniter button(3) back down.
19
