Weber 55143 manual Installing Features

Installing Features

Install the right trim piece with tool holders You will need: Right trim piece with tool holders Push the Right trim piece into the frame as shown(1), making sure that the tabs on the underside of the trim piece are snapped into the slots in the frame.(2)

(1)

(2)

Install the left end trim piece and swing-up work surface

You will need: End trim piece, swing-up work surface, swing-up work surface rod, two 1/2 inch bolts, two nylon washers and a wrench

1.) Start the left end trim piece into the frame as shown, do not push the trim piece in all of the way and do not add bolts yet.

2.) Slide the swing-up work surface rod through the holes at the top of the swing-up work surface.

3.) Insert one end of the swing-up work surface rod into the hole in the frame.

C002.c C-1