TROUBLESHOOTING
PROBLEM | CHECK | SOLUTION | |
|
|
| |
Burners burn with a yellow or | Inspect Spider/Insect Screens for possible obstructions.. (Blockage | Clean Spider/Insect Screens (refer to “ANNUAL MAINTENANCE”).. | |
orange flame, in conjunction with | of holes..) |
| |
the smell of gas (This is normal for |
|
| |
Is fuel hose bent or kinked? | Straighten fuel hose.. | ||
the burner lighting tube). | |||
|
| ||
Symptoms: | Does Burner light with a match? | Clean burners (refer to “MAINTENANCE”).. | |
Burner does not light, or flame is | Did you use the snap igniter several times until the main burner lit | Make sure to hold the control knob in for two seconds after | |
low in HI position. | (refer to “MAIN BURNER IGNITION”)? | snapping the igniter and seeing the orange flame from the burner | |
|
| lighting tube.. | |
|
|
| |
| Does the igniter work? Do you see a spark when you repeatedly | Try manually lighting the burner (refer to “MAIN BURNER | |
| use the snap igniter? | MANUAL IGNITION”).. Call customer service.. | |
|
|
| |
Experiencing | Are you preheating barbecue in the prescribed manner? | All burners on HI for 10 to 15 minutes for preheating.. | |
m CAUTION: Do not line |
|
| |
Are the cooking grates and Flavorizer® bars heavily coated with | Clean thoroughly (refer to “CLEANING”).. | ||
the bottom tray with |
| ||
|
| ||
aluminum foil. | Is the bottom tray “dirty” and not allowing grease to flow into catch | Clean bottom tray.. | |
| pan? |
| |
|
|
| |
Burner flame pattern is erratic. | Are burners clean? | Clean burners (refer to “MAINTENANCE”).. | |
Flame is low when burner is on HI. |
|
| |
Flames do not run the whole length |
|
| |
of the burner tube. |
|
| |
|
|
| |
Inside of lid appears to be “peeling.” | The lid is porcelain enamel or stainless steel, not paint.. It cannot | Clean thoroughly (refer to “CLEANING”).. | |
(Resembles paint peeling.) | “peel”.. What you are seeing is baked on grease that has turned to |
| |
| carbon and is flaking off.. |
| |
| THIS IS NOT A DEFECT. |
| |
|
|
| |
Cabinet doors are not aligned. | Check the adjustment pin on the bottom of each door.. | Loosen adjustment nut/s.. Slide door/s until aligned.. Tighten nut.. | |
|
|
|
If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area using the contact information on our web site. Log onto www.weber.com®.
SIDE BURNER TROUBLESHOOTING
PROBLEM | CHECK | SOLUTION |
|
|
|
Side Burner does not light. | Is gas supply off? | Turn supply on.. |
|
|
|
Flame is low in HI position | Is the fuel hose bent or kinked? | Straighten hose.. |
|
|
|
Push button ignition does not work. | Does burner light with a match? | If match lights burner, check igniter (refer to “SIDE BURNER |
|
| MAINTENANCE”).. |
|
|
|
If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area using the contact information on our web site. Log onto www.weber.com®.
30
