MAINTENANCE
REPLACING MAIN BURNERS
A) Your Summit® gas grill must be off and cool..
B) Turn gas off at source..
C) Disconnect gas supply..
D) Remove cooking grates..
E) Remove Flavorizer® bars..
F) Remove smoker box (if included in your model)..
Remove Control Panel
G) Parts required: Phillips screwdriver and a towel.. |
| |
a) | Remove the burner control knobs (1).. |
|
b) | Open both doors and place a towel on top of the doors.. |
|
| This will protect the control panel and tops of the doors from getting |
|
| scratched on the next step. |
|
c) | Remove the screws from the underside of the control panel with a Phillips | 1 |
| screwdriver (2).. | |
d)Tilt the conrol panel forward and lift up and away from the grill (3) (For Summit® models with LED features: Be careful not to break or disconnect the wires for the control panel LED’s)..
e)Place the control panel on the towel covering the door assemblies (4)..
The grill illustrated may have slight differences than the model purchased.
4
2 | 3 |
|
H) Remove the two screws that secure the manifold to the cookbox.. Pull manifold assembly out from the manifold frame (5)..
I)Pull the selected burner(s) tube(s) from manifold frame and replace with a new
burner tube (6)..
67
65
www.weber.com® 33
