ROTISSERIE BURNER IGNITION & USAGE

F)Insert the pointed end of the rotisserie shaft into the motor.. Lower the rotisserie spit into the grooves on the cookbox (6)..

G)

The rotisserie shaft should rotate so that the heavy side of the meat or poultry

6

 

rotates down to the bottom.. Large cuts may require the removal of the cooking

 

 

 

grates and warming rack to allow full rotation of the shaft.. Remount the food if

 

 

necessary for better balance..

 

H)

Turn the motor on..

 

ROTISSERIE COOKING

• Meats (except poultry and ground meat) should be brought to room temperature before cooking.. (20 to 30 minutes should be adequate for most foods.. If frozen defrost completely before cooking..)

Tie meat or poultry with a string, if necessary, to make the shape as uniform as possible before putting it on the spit..

Remove cooking grates and warming rack to allow food to turn freely.

Follow lighting instructions for rotisserie burner.

Set rotisserie burner on medium-high based on outside air temperatures.

Place food within area of burner.

If you wish to save drippings for gravy, place a drip pan directly under the food on top of the Flavorizer® bars..

Food preparation steps are the same for rotisserie cooking as for regular cooking.

All cooking is done with the lid closed.

If foods are too heavy or are irregular shapes, they may not rotate well and should be cooked by the Indirect Method without using the rotisserie..

Smoker can be used in conjunction with rotisserie for more smoke flavor.

Note: When using the rotisserie burner, grill thermometer will not reflect the temperature inside the cooking box.

ROTISSERIE MOTOR STORAGE

A) Before retracting rotisserie back into the side table, unplug the power cord and carefully place plug/power cord into the storage area of the retractable rotisserie assembly (1)..

m CAUTION: Failure to properly store the rotisserie power

 

 

 

 

cord may result in damage to the power cord when opening

1

2

3

 

and closing the retractable rotisserie panel.

 

 

B)

Using your index finger, disengage retractable rotisserie panel (2).. Push panel down

 

 

 

 

until it snaps securly in place (3)..

 

 

 

ROTISSERIE SPIT STORAGE

 

 

 

A)

Remove forks from rotisserie spit.. Carefully insert spit into cabinet by sliding through

 

 

 

 

hole in right side panel (1)..

 

 

 

m CAUTION: Do not allow rotisserie spit to come into contact

 

 

 

 

with any gas lines.

 

1

 

B) Store rotisserie forks by placing them on the hooks located on the catch pan holder within the grill cabinet (2)..

2

30

Page 30
Image 30
Weber 56211, E/S 470 LP manual Rotisserie Cooking, Rotisserie Motor Storage, Rotisserie Spit Storage, With any gas lines