![](/images/new-backgrounds/1199898/19989819x1.webp)
Step 2
Assemble wheel frame
You will need: wheel frame, two wheels, two wheel hubcaps, hammer and a block of wood.
Set one end of wheel frame on the block of wood (or other hard, protected surface). Put one wheel on axle, WEBER side facing up, and tap on one hubcap.Figure 1.
Repeat with other wheel and hubcap.
EB | W |
W | E |
| B |
Step 3
Assemble top frame
You will need: left frame, right frame, two
Note - Work on carpeted area (on grass or one of the boxes) to protect the finish during frame assembly.
Lay the leg pieces as shown so the leg tabs point up. Figure 2.
Slip the two frame pieces together with the tabs inside. Figure 2 (a). Slip washers on bolts, insert bolts as shown and tighten. Figure 2 (b). (If you try to insert a bolt and there are no holes, you have the left frame turned the wrong way. Turn the left frame around.)
Frame tabs
Figure 1 | (a) |
|
Leg tabs
Right frame
Left frame
(b)
Figure 2
10