![](/images/new-backgrounds/1263922/2639221x1.webp)
Burner Tube Replacement Instructions
WARNING: BEFORE STARTING, TURN THE GAS OFF AT THE GAS SUPPLY, DISCONNECT THE GAS SUPPLY AND CAREFULLY READ THESE INSTRUCTIONS BEFORE REPLACING THE MAIN BURNERS.
STEP 1
Remove the Cooking Grates and Flavorizer® Bars
Your Weber Gas Barbecue must be OFF and cool.
STEP 2
STEP 3
Remove the Manifold and Valve Assembly
Unhook the manifold bracket(1) and unscrew the two nuts(2) that hold the manifold to the cooking box. Pull the manifold assembly out of the burners and carefully set it down.
Remove the Control Panel and burner control knobs
Be sure gas is turned off at source.
Remove control panel and burner control knobs
You will need: Phillips screwdriver.
1)Remove control knobs.
2)Remove screws through slots in trim with a Phillips screwdriver.
3)Pull up igniter button until it sticks in the up position and remove control panel from grill.
*If you have a different style grill, put your fingers under the edge of the control panel at the control panel push- in buttons and pull toward you.
(1)
Manifold Valve Assembly
Frame Brace
Cookbox | (1) |
(2) |
*The grill illustrated may have slight differences than
the model purchased
(2) | Hole in the | |
frame brace | ||
|
(3)
(2) *If you have a different style grill
there will be push buttons
to remove instead of screws
*The grill illustrated may have slight | Control panel |
differences than the model purchased |
|
| 1 |
55355 07/31/02