MAINTENANCE27
15.To reinstall the manifold assembly, reverse steps 7 through 14.
CAUTION: The burner openings (1) must be positioned properly over the valve orifices (2).
(2) |
(1) |
Check proper assembly before fastening manifold in place.
WARNING: After reinstalling the gas lines, they should be leak checked with a soap and water solution before using the grill. (See, “Check for gas leaks.”)
CROSSOVER® IGNITION SYSTEM OPERATIONS
If the Crossover ignition system fails to ignite the LEFT burner in a burner set, light the LEFT burner with a match. If the LEFT burner lights with a match, then check the Crossover® ignition system.
•Check that both ignition wires(1,2) are attached properly.
•Check that the Crossover® ignition button is activating.
•You should hear the igniter sparking.
If the Crossover® ignition system still fails to light, contact the Customer Service Representative in your region using the contact information sheet provided with your manual.
(1) |
(2) |
REPLACE IGNITER BATTERIES
Parts required: 1 AA alkaline battery per igniter.
Unscrew igniter button from top of control panel. Remove igniter button and contact spring. Remove old battery and replace with a new AA alkaline battery. Positive end(1) of battery faces up as shown in illustration. Replace spring contact(2) and screw igniter button(3) back down.
