Assembly, Check Package Contents, Tools needed

Assembly

Tools needed

Screwdrivers, regular

and Phillips

7/16 inch open-end or an adjustable wrench

Step 1

Check Package Contents

You should have received the parts shown below with your Weber FirePlace. In the unlikely event a part is missing or damaged, do not return the FirePlace, instead contact:

WEBER-STEPHEN PRODUCTS COMPANY

Customer Service Center

250 South Hicks Road

Palatine, IL 60067-6241 (708) 705-8660

(800) 446-1071

Parts

Lid

Upper support ring

Four uprights

Lower support ring

Bottom

Heat deflector

Four legs

Two steel handles

Two top wood handles	®
	®

Two bottom wood handles

Two wood screws

Sixteen large fiber washers

Eight small fiber washers

Twenty 1/4 inch steel washers

Twenty-four 1/4-20 hex nuts

Twenty-four 1/4-20 x 5/8 inch machine screws

Step 2

Install Steel Handles

You will need: lid, eight small fiber washers, eight steel washers, two steel handles, four machine screws, four hex nuts, a regular screwdriver and wrench.

Install handles as shown in Figure 1.

CAUTION: Do not overtighten; you may crack the porcelain finish.

Machine screw