Step 3
Install Wood Handles
You will need: lid assembly, two top wood handles, two bottom wood handles, two wood screws and a Phillips screwdriver.
Install handles as shown in Figure 2.
Wood screw 
Top wood handle 
Bottom wood handle
Figure 2
Step 4
Install Three Legs
You will need: three legs, bottom, six machine screws, twelve large fiber washers, nine steel washers, six hex nuts, a regular screwdriver and wrench.
Install only three legs as shown in Figure 3. Note that the machine screws are not installed in the same direction.
CAUTION: Do not overtighten; you may crack the porcelain finish.
Hex nut |
|
Steel washer | Machine screw |
Large fiber |
|
washer |
|
| Steel washer |
| Large fiber |
| washer |
Machine screw |
|
| Steel washer |
| Hex nut |
Step 5
Install Heat Deflector and Fourth Leg
You will need: heat deflector, bottom assembly, one leg, two machine screws, four large fiber washers, three steel washers, two hex nuts, a regular screwdriver and wrench.
Insert the heat deflector between the three legs and position it so it rests on all the leg tabs, as shown in Figure 4.
Now install the fourth leg using the procedure shown in Figure 3, and making sure the heat deflector rests on all
leg tabs.
Heat deflector
Figure 4
Leg tab
Figure 3
