Step 6
Assemble Upper Support Ring
You will need: four uprights, upper support ring, four machine screws, four hex nuts.
Assemble uprights as shown in Figure 5.
Machine screw
Hex nut
Figure 5
Step 7
Assemble Lower Support Ring
You will need: lower support ring, upright assembly, eight machine screws, eight hex nuts, a screwdriver and wrench.
Assemble lower support ring as shown in Figure 6.
Upper ring assembly from Step 5
Lower support ring
Hex nut
Machine screw
Step 8
Final Assembly
You will need: bottom assembly, ring assembly, lid assembly.
Place the ring assembly inside the FirePlace bottom with the lower support ring down. Figure 7.
Place the FirePlace lid on the upper support ring. It should rest on the upright tabs.
Figure 7
Figure 6