Connect the side burner hose as follows:
1)Slide back the collar of the quick disconnect on the manifold.
2)Push the male fitting of the side burner hose into the quick disconnect, and maintain pressure. Slide the collar closed.
(1)
(2)
Quick disconnect will be engaged.
Check to be sure that the side burner valve is OFF. Push the side burner control knob down and turn it clockwise. If it doesn’t turn, the valve is OFF. If it does turn, continue turning it clockwise until it stops, then the burner is OFF.
Install Flavorizer® Bars and Cooking Grates You will need: five Flavorizer Bars and two cooking grates.
Place the Flavorizer Bars side by side in the cooking box.
Set the cooking grates onto the ledges in the cooking box with the rounded sides up.
Installing the warming rack
You will need: warming rack.
Set the warming rack into the slots at the rear of the cooking box.
Installing the Warm-Up™ Basket
You will need: Warm-Up Basket
Insert one end of the Weber
