BUILT-IN CONSTRUCTION GENERAL INFORMATION
WARNING
A
LOCATING YOUR SIDE BURNER
When determining a suitable location for your side burner installation, give attention to concerns such as exposure to wind, proximity to traffic paths, and keeping any gas supply lines as short as possible. Never locate the Weber Gas Side Burner in a garage, breezeway, shed, under an unprotected overhang, or other enclosed area. Locate the side burner and structure so there is enough room to safely evacuate the area in case of a fire.
CLEARANCE FROM
Warning: Clearance from the outside walls of the sides and back of the sleeve must be a minimum of 6 inches from a
NON- COMBUSTIBLE SURFACE
6 inches |
|
6 inches | 6 inches |
Sleeve | Countertop |
CLEARANCE FROM COMBUSTIBLE SURFACES OR STRUCTURES
Warning: Clearance from the outside walls of the sides and back of the sleeve must be a minimum of 24 inches from a combustible surface. Measure from the outside wall of the sleeve to the combustible surface. Figure 2. Refer to “Install Gas Supply” on page 2 before starting installation.
COMBUSTIBLE SURFACE
24 inches |
|
24 inches | 24 inches |
Sleeve | Countertop |
Figure 2
WARNING: All countertop finished surfaces must be constructed of a noncombustible material.
Figure 1
WARNING: All countertop finished surfaces must be constructed of a noncombustible material.
7