LINE REPLACEMENT

1.Remove spool by firmly pulling on tap button.

2.Clean entire surface of hub and spool.

3.Replace with a pre-wound spool, or cut a length of 20 feet of 0.080! (2 mm) diameter Weed Eaterr brand line.

WARNING: Never use wire, rope, string, etc., which can break off and become a dangerous missile.

4.Insert one end of the line about 1/2 inch (1 cm) into the small hole on the inside of spool.

Small

Hole

Spool

Line in Notch

Hub

Line exit hole

 

5.Wind the line evenly and tightly onto the spool. Wind in the direction of the arrow found on the spool.

6.Push the line into the notch, leaving 3 to 5 inches (7 -- 12 cm) unwound.

7.Insert the line into the exit hole in the hub as shown in the illustration.

8.Align the notch with the line exit hole.

9.Push spool into hub until it snaps into place.

10.Pull the line extending outside of the hub to release the line from the notch.

CARBURETOR ADJUSTMENT

Your carburetor is equipped with limiter caps. Carburetor adjustment is a complicated task. We recommend that you take your unit to an authorized service dealer. Damage will occur if you turn the needles beyond the limiter stops.

WARNING: Perform the following steps after each use:

S Allow engine to cool, and secure the unit before storing or transporting.

SStore unit and fuel in a well ventilated area where fuel vapors cannot reach sparks or open flames from water heaters, electric

motors or switches, furnaces, etc.

SStore unit with all guards in place. Position unit so that any sharp object cannot acci-

dentally cause injury.

SStore unit and fuel well out of the reach of children.

SEASONAL STORAGE

Prepare unit for storage at end of season or if it will not be used for 30 days or more.

If your unit is to be stored for a period of time:

SClean the entire unit before lengthy storage. S Store in a clean dry area.

S Lightly oil external metal surfaces.

FUEL SYSTEM

Under FUELING ENGINE in the OPERA- TION section of this manual, see message la- beled IMPORTANT regarding the use of ga- sohol in your engine.

Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to the gasoline in the fuel tank or fuel storage container. Fol- low the mix instructions found on stabilizer container. Run engine at least 5 minutes after adding stabilizer.

ENGINE

SRemove spark plug and pour 1 teaspoon of 40:1, 2-cycle engine oil (air cooled) through the spark plug opening. Slowly pull the

starter rope 8 to 10 times to distribute oil.

SReplace spark plug with new one of recom-

mended type and heat range.

SClean air filter.

S Check entire unit for loose screws, nuts, and bolts. Replace any damaged, broken, or worn parts.

S At the beginning of the next season, use only fresh fuel having the proper gasoline to oil ratio.

OTHER

SDo not store gasoline from one season to another.

S Replace your gasoline can if it starts to rust.

8

Page 8
Image 8
Weed Eater 530086930 Line Replacement, Carburetor Adjustment, Seasonal Storage, Fuel System, Engine, Other

530086930 specifications

The Weed Eater 530086930 is a powerful and reliable tool designed for homeowners and landscaping professionals seeking efficiency in lawn maintenance. This product stands out in the realm of string trimmers, offering features that cater to both ease of use and performance.

One of the main features of the Weed Eater 530086930 is its lightweight design, making it easy for users to maneuver while trimming hard-to-reach areas. Weighing just around 10 lbs, this trimmer reduces fatigue, allowing users to work for extended periods without discomfort. The adjustable handle further enhances its ergonomic design, accommodating various user heights and preferences.

The Weed Eater 530086930 utilizes a gas-powered engine that delivers robust performance, ensuring that tough weeds and grass are tackled with ease. This trimmer is equipped with a 2-cycle engine, which is known for its reliability and power output. The engine is designed for efficient fuel consumption, enabling longer operation times between refuels, thus increasing productivity in yard care tasks.

A standout feature of the Weed Eater 530086930 is its automatic line advance system. This technology ensures that the cutting line is fed seamlessly, preventing downtime caused by line adjustments. The system is both user-friendly and efficient, allowing for uninterrupted trimming.

Another significant characteristic is the versatile cutting ability. The Weed Eater 530086930 can effectively transition between trimming and edging tasks. It features a pivoting head that rotates easily, allowing users to switch angles seamlessly for different tasks. This versatility makes it an ideal choice for maintaining borders, flower beds, and tight corners.

Durability is also at the forefront of the Weed Eater 530086930's design. The trimmer is constructed with rugged materials that can withstand the demands of regular use, ensuring longevity. Additionally, the replacement parts are readily available, making maintenance and repairs straightforward.

In summary, the Weed Eater 530086930 combines lightweight design, powerful engine performance, user-friendly technologies, and durability. These characteristics make it a valuable tool in any lawn care regimen, appealing to both casual users and serious landscaping enthusiasts. Whether you are trimming overgrown areas or maintaining neat edges, the Weed Eater 530086930 is engineered to deliver reliable, efficient, and effective results.