Oven

Cleaning

 

 

 

 

 

 

INSTRUCTIONS

 

PRESS

DISPLAY

Stopping or interrupting a Self-Cleaning Cycle:

 

 

If it becomes necessary to stop or interrupt a self-cleaning cycle

 

 

due to excessive smoke or fire in the oven:

 

 

 

1.

Press

@.

 

 

@

 

2.

Once the oven

has cooled down for approximately

1 HOUR

 

 

and

the "LOCK"

is no longer displayed, the oven

door can

 

Figure 1

 

then be opened (Figure 1).

 

 

 

Note: If your clock is set for normal 12 hour display mode the Delayed Self-Clean cycle than 12 hours in advance. To set for Delayed Self-Clean Cycle 12-24 hours in advance time of day display mode.

can never be set to start more set the control for the 24 hour

Adjusting Oven Temperature

The temperature in the oven has been pre-set at the factory. When first using the oven, be sure to follow recipe times and temperatures. If you think the oven temperature is cooking too hot or too cool for the temperature you select, you can adjust the actual oven temperature to be more or less than what is displayed. Before adjusting, test a recipe by using a temperature setting that is higher or lower than the recommended temperature. The baking results should help you to decide how much of an adjustment is needed.

INSTRUCTIONSPRESS

To adjust the oven temperature higher

t. Press _

for 6 seconds (Figure 2).

0

 

2.To increase the temperature use the number pads to enter the

desired change. (Example 30°F) (_ (_ (Figure 3). The (Z)(Z) temperature may be increased as much as 35°F (19°C).

3.

Press (_ART_

or @ to accept the temperature change and

( or

 

the display will return to the time of day (Figure 4).

@

 

 

 

 

 

To adjust

the oven temperature

lower

 

1.

Press

_

for 6 seconds (Figure

5).

 

2.To decrease the temperature use the number pads to enter

the desired

change. (Example-30°F) _

(_

and then

(Z)db

press _

(Figure 6). The temperature

may

be decreased

Q

as much as -35°F (-19°C).

3. Press _ or @ to accept the temperature change and the ( or

display will return to the time of day (Figure 7).

@

 

Note: The oven

temperature adjustments made with this feature will

not change the Self-Clean cycle temperature.

DISPLAY

Figure 2

Figure 3

Figure 4

Figure 5

Figure 6

Figure 7

28

Page 28
Image 28
Kenmore 790.4906 manual Zdb, Oven Cleaning, Adjusting Oven Temperature, Stopping or interrupting a Self-Cleaning Cycle