Kenmore 790.4906 manual Setting the Clock, Setting Continuous Bake or 12 Hour Energy Saving, Press

Setting the Clock

Setting Continuous Bake or 12 Hour Energy Saving

The KITCHEN TIMER _ and FLEX CLEAN _ pads control the Continuous Bake or 12 Hour Energy Saving

ON/OFF

features. The oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is left on for more than t t hours and 59 minutes. The oven can be programmed to override this feature for

Continuous Baking. INSTRUCTIONS

To set the control for Continuous Bake or 12 Hour

Energy Saving features

t. Press and hold _ for 7 seconds (Figure t). After 7 seconds

ON/OFF

"Off 12Ht Off will appear in the display (Figure 2).

2.Press _'FL_XNto_switch between the 12 Hour Energy Saving and

continuous bake features. Note: "On 12Hr On" (Figure 3) in the display indicates the control is set for the 12 Hour Energy Saving mode and "Off 12Hr Off" indicates the control is set for the Continuous Bake feature (Figure 2).

3. Press _Am_ or _ and wait 5 seconds to accept the change.

(Figure 4; display will return to time of day).

PRESS	DISPLAY
for 7	Figure	1
ON/OFF
seconds
Q	Figure	2
	Figure	3
	Figure	4

Setting Kitchen Timer

The KITCHEN TIMER _	pad controls the Kitchen Timer feature. The Kitchen Timer serves as an extra timer in the kitchen
	ON/OFF

that will beep when the set time has run out. it does not start or stop cooking. The Kitchen Timer feature can be used during any of the other oven control functions. Refer to "Minumum and Maximum Control Pad Settings" for time amount settings.

INSTRUCTIONS PRESS DISPLAY

To set the Kitchen Timer (example: 5 minutes)

1. Press	_.	"0:00" will appear and "TIMER" will flash in the
	ON/OFF	ON/OFF
display	(Figure	5).
		Figure 5

2.Press the number pads to set the desired time in the display

(example _f-_).		Press _'_A_. The time will begin to count down
with "5:00" and "TIMER" will stay in the display			(Figure 6). Note: if			Figure	6
(_is	not pressed the timer will return to the time of day.
3. When	the set time has run out, ":00" and "TIMER"			will show	in the	Figure	7
display	(Figure 7). The clock will beep until _			is pressed.		(_
		ON/OFF				ON/OFF
To cancel the Kitchen Timer before the set time has run out
Press _	twice	until the clock displays ":0:00"	and	"TIMER".	The display	will return to the time of day.
ON/OFF

To Set Add 1 Minute Feature

The (,,_,_) ADD 1 MINUTE pad is used to set the Add 1 Minute feature. When the (,_) pad is pressed, 1 minute is

added to the Minute Timer feature if this feature is already active. If the Minute Timer feature is not active and the

pad is pressed, the Minute Timer feature will become active and will begin counting down from 1 minute. For further information on how to set the Minute Timer feature see To Set the Minute Timer instructions above.

10